Closed Cell Spray Foam Removal in Carlisle means cutting rigid polyurethane foam off rafters, purlins and roof decks without wrecking the timber underneath. We handle lofts, attics, cavity walls and commercial units across Carlisle and Cumbria, usually within a week of your survey. If a lender has flagged the foam, or your loft is sweating and the timbers are going soft, we strip it, bag it and leave the roof space ready for a surveyor to sign off.
Closed Cell Spray Foam Removal in Carlisle is the controlled cutting, breaking and extraction of high-density polyurethane foam from roof timbers, rafters and decks, followed by cleaning of the substrate so the timber can dry and be inspected. Closed cell foam is the rigid, dense type, often BASF, Dow or Recticel material, and it bonds like glue. We cut it into manageable blocks with a spray foam removal saw, prise it off with an oscillating multi-tool, then vacuum the dust and residue with an industrial vacuum and air scrubber running alongside.
Most Carlisle jobs we get called to fall into three buckets: a mortgage lender has refused to lend until the foam is gone, the loft has condensation dripping off the felt because the foam sealed the roof, or the homeowner is selling and the buyer's surveyor flagged it. We also strip closed cell insulation removal Carlisle jobs in commercial units around Kingstown and Parkhouse, where foam has been sprayed over cabling and steelwork. If you need closed cell spray foam extraction near me Carlisle, we cover the whole city and the surrounding villages.
Every Carlisle job includes the full strip, clean and documentation. Anything beyond that, like fitting new insulation or replacing rotten timber, is quoted separately on the day so you can decide with the numbers in front of you.
We cut and remove all accessible closed cell foam from rafters, purlins, roof decks and joists. That includes foam around cables and pipework, which we clear with hand tools and dry ice blasting rather than a saw, so nothing gets nicked or damaged.
Protective sheeting, a sealed loft hatch, a negative air machine and an air scrubber run for the whole job. Foam dust and isocyanate particles are pulled out of the house, not into your landing or bedrooms. We also wear full PPE respirators on every shift.
Once the foam is off, we vacuum every rafter and joist with an industrial vacuum and wipe down cables and pipework. You get bare, clean timber that a surveyor can inspect and that will dry properly once ventilation is restored.
We take timber moisture readings before and after removal with a thermal imaging camera and moisture meter. Those numbers go into your handover pack, so you can see exactly how damp the timbers were and how they are recovering.
Every section of the roof space is photographed before, during and after removal. Lenders, surveyors and buyers accept this record, which is why most of our Carlisle jobs are booked by homeowners mid-sale who need proof the foam is gone.
Foam, dust and packaging go into sealed bags and leave the property with us. We dispose of it through licensed waste transfer, so you are not left with a skip on the drive or a loft full of bags to shift yourself.
We inspect the loft, measure the foam coverage, check timber moisture with a thermal imaging camera and look for overspray on cables and pipework. You get a fixed written price the same day, usually within two hours of the visit. If the foam is open cell rather than closed cell, we tell you straight away because the price and method change.
Foam dust gets everywhere if you let it. We lay protective sheeting, seal the loft hatch, and run a negative air machine with an air scrubber so dust and isocyanate particles are pulled out of the house rather than into your landing. Our technicians wear full PPE respirators and disposable coveralls for the whole shift.
We cut the closed cell foam into blocks with a spray foam removal saw, then work it free from rafters and felt with an oscillating multi-tool. Around cables and pipework we switch to hand tools and dry ice blasting so we do not nick a wire. A typical three-bedroom Carlisle loft takes one to two days to strip.
Loose foam, dust and residue go into sealed bags and out of the property. We vacuum every rafter with an industrial vacuum, wipe down cables, and run the air scrubber until the space is clear. You get before-and-after photographs of every section, which is exactly what lenders and surveyors ask to see.
We walk the roof space with you, show you the moisture readings, and explain what insulation or ventilation work makes sense now the foam is out. If you want us to fit replacement insulation to current standards, we quote that separately on the day. Otherwise we leave the loft clean, dry and ready for your next trade.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Cuts dense closed cell foam into manageable blocks so it can be prised off rafters and purlins without tearing the timber. It is the fastest way to break down large foam areas on a Carlisle loft.
Gets into corners, around nails and between rafters where a saw will not fit. We use it to work foam free from timber edges and to trim residue close to the surface.
Removes foam residue from cables, pipework and fragile surfaces without abrasion or water. It is slower than cutting but far safer around electrics, and we use it on most Carlisle jobs where cabling is buried in foam.
Pulls foam dust and isocyanate particles out of the loft and filters the air. Run alongside a negative air machine, it keeps dust out of the rest of the house during removal.
Shows where foam has been sprayed, how thick it is and where moisture is trapped behind it. That survey shapes the removal plan and the price, so you do not pay to strip foam that is not there.
Closed cell foam contains isocyanate, and the dust is not something to breathe. Our technicians wear full PPE respirators and disposable coveralls for the whole shift, every job.
Strips foam residue from stone, brick and steel where hand tools cannot reach. We use it with full containment on commercial and agricultural buildings around Carlisle.
A three-bedroom Stanwix terrace had closed cell foam sprayed across every rafter during a 2010s retrofit. The buyer's surveyor flagged it, the lender refused, and the sale stalled. Timber moisture readings were high, and condensation was dripping onto old mineral wool.
We stripped the foam in two days, vacuumed every rafter and restored ventilation at the eaves. Moisture readings dropped from 24% to 16% over three weeks. The lender accepted our photographic record and the sale completed within a month.
A 1970s semi in Harraby had thick closed cell foam between every rafter and mould forming on the roof felt. The homeowner noticed a damp smell in the back bedroom and condensation running down the loft hatch in winter.
We removed the foam, treated the mould, and restored airflow through the roof space. Within four weeks the damp smell had gone and the timbers read normal moisture. The homeowner then fitted breathable insulation to current standards.
A warehouse near Kingstown had closed cell foam sprayed over steel purlins and cabling, and a roof inspection was due. The foam hid the cable runs and made it impossible for the inspector to assess the steelwork.
We removed the foam in phases over three nights, using dry ice blasting around the cabling and saws on the purlins. The inspection went ahead on schedule, the cabling was undamaged, and the warehouse kept trading throughout.
Closed cell foam causes a small number of very specific problems, and we see the same ones across Carlisle. Here is what we fix, and what happens if you leave it.
Ask a pro →We strip the foam, photograph every rafter and provide a written removal record your lender will accept. Most Carlisle sales we unblock complete within four to six weeks. We can usually survey within 48 hours and start within a week of you accepting the quote.
We remove the foam, restore ventilation paths and take moisture readings before and after. The roof space dries out over a few weeks. Where timbers are already soft, we treat them and show you the readings so you can track recovery.
We cut the foam off carefully, inspect every rafter and purlin, and flag any soft timber with photographs. If a section needs replacing, we price it before touching it. Catching it during removal usually saves the structural repair entirely.
We use hand tools and dry ice blasting around cables and pipework instead of a saw. That clears the foam without abrasion or water, and we check the cable condition as we go. Any damage gets flagged and photographed for your electrician.
Most Carlisle lofts cost between £1,800 and £4,500 in 2026, depending on foam coverage, access and how much timber needs cleaning. A single small loft runs £1,800 to £2,400. A full three-bedroom semi with foam across every rafter sits around £3,000 to £4,500. Commercial units and warehouse roofs are priced per square metre after survey. We give you a fixed price the same day we inspect.
Yes. Closed cell spray foam removal in Carlisle is our main service, and we cover every neighbourhood from City Centre to Cummersdale. We cut the foam out with a spray foam removal saw and oscillating multi-tool, extract the dust with an industrial vacuum and air scrubber, and clean the timbers back to bare wood. We do not use chemicals that damage the roof structure.
It is harder than in drier parts of the country. Cumbria gets high rainfall and old slate roofs with limited ventilation, so closed cell foam traps moisture against felt and rafters. That means we often find damp timber and surface mould, which adds time for cleaning and drying. Expect an extra half day on a typical Carlisle loft compared with a dry, well-ventilated roof.
A typical Carlisle loft takes one to two days on site. Larger roofs, foam sprayed over cables and pipework, or heavy overspray can stretch to three days. We set up containment on day one, strip and extract on day one or two, then clean and photograph on the final day. You can usually be back using the loft space the same week, once replacement insulation is fitted.
Spray Foam Removal near meIf you are searching for spray foam removal near me in Carlisle, this is the same team and the same kit. We cover every Carlisle postcode and the surrounding villages, so the nearest foam removal crew is usually within 20 minutes of your door.Explore →
Same day Spray Foam RemovalUrgent completion or a lender deadline? We hold same day slots for Carlisle homeowners who need foam out fast. Subject to access and survey, we can be on site within hours and strip a standard loft in a single shift.Explore →
24/7 Spray Foam RemovalCommercial clients around Kingstown and Parkhouse often need foam removed outside trading hours. We run 24/7 bookings for warehouses, retail units and landlords so the work happens when your business is closed.Explore →
Residential Spray Foam RemovalMost of our Carlisle work is residential: lofts, attics and rafters in terraces, semis and detached homes. We protect carpets, seal the loft hatch and clean up fully before we leave, so the rest of the house stays dust-free.Explore →
Commercial Spray Foam RemovalWe strip closed cell foam from warehouses, agricultural buildings and industrial units across Cumbria. Larger roofs are priced per square metre, with containment and extraction planned around your operating hours.Explore →
Loft Spray Foam RemovalLoft foam is the most common job we do in Carlisle. Closed cell foam sprayed between rafters traps moisture and blocks ventilation. We strip it back, clean the timbers and leave the loft ready for proper insulation.Explore →
Roof Spray Foam RemovalFoam sprayed directly onto the underside of roof felt or slate is the hardest to remove and the most likely to cause mortgage refusal. We cut it off carefully, check the felt and battens, and document the roof condition for your lender.Explore →
Attic Spray Foam RemovalAttic and loft mean the same space in most Carlisle homes. If your attic has closed cell foam on the rafters or between joists, we remove it, vacuum the area and give you a clean, dry space ready for new insulation.Explore →Fixed price after survey, usually within 48 hours of your call. TrustMark registered, fully insured, and we leave a photographic record your lender will accept. Call 0122 891 5049 or book online and we will get you surveyed fast.
Get a fixed quote 0122 891 5049 →Call 0122 891 5049 or email [email protected] and we will get back to you the same working day. We cover all CA postcodes and can usually survey your loft within 48 hours. For emergency spray foam removal Carlisle 24/7, call any time.