Environmentally friendly insulation removal in Carlisle, Cumbria is the clean, low-dust way to strip failed spray foam from lofts, roofs and cavity walls. We use dry ice blasting and industrial vacuums to lift open cell and closed cell foam without chemicals or landfill waste. If a mortgage lender has flagged your spray foam, or you have spotted loft condensation and timber rot, our team surveys, extracts and recycles the lot. Call 0122 891 5049 for a same-day assessment.
Environmentally friendly insulation removal in Carlisle, Cumbria is the controlled extraction of spray foam insulation using low-impact methods that protect your roof structure and divert waste from landfill. We start with a thermal imaging camera survey to map foam depth and find hidden overspray around cables and rafters. Then we blast the foam with dry ice pellets or abrasive media, capture the debris with an industrial vacuum and air scrubber, and bag the waste for recycling. Most lofts take one to two days. No harsh solvents, no smashed plasterboard, no foam dust through the house.
Carlisle homeowners call us for three main reasons: a mortgage refusal due to spray foam, loft condensation that has nowhere to escape, and roof timber rot discovered during a survey. The city's older sandstone and brick housing stock traps moisture, and closed cell spray foam makes it worse by sealing the roof deck. If you need eco insulation removal service Carlisle wide, we work across the CA1 to CA6 postcodes. We also handle sustainable Spray foam removal Carlisle landlords need between tenancies, usually with same day eco friendly insulation removal Carlisle slots when the diary allows.
Every job is scoped after a survey, so the price matches the work. The list below covers what is included as standard on a typical Carlisle loft or roof removal. Cavity wall extraction, structural repairs and new insulation are quoted separately if you need them.
We visit, measure foam depth with a thermal imaging camera, check access and overspray, and give you a fixed written price the same day. No charge for the survey and no obligation to book. Most quotes are issued within two hours of the visit.
Dust sheets, a sealed loft hatch and a negative air machine keep foam dust out of your living space. Technicians wear PPE respirators and coveralls. Setup takes around 45 minutes, and we clear the barriers at the end of each working day.
Dry ice blasting, sand blasting equipment, a spray foam removal saw and an oscillating multi-tool handle open cell and closed cell foam. An industrial vacuum captures debris at source. Most lofts are cleared in one to two days.
We check rafters for rot, condensation staining and insect damage, and inspect cables for foam residue. Difficult removal from cables is common, and we clear it without cutting services. Anything needing repair is photographed and quoted separately.
Foam, dry ice pellets and blasting media are sorted into separate waste streams, with up to 95% recycled. You receive waste transfer notes and a removal report with before-and-after photos, which lenders and building control officers accept.
We sweep the loft, remove all barriers and walk you through the finished space. You get the removal report, waste notes and after photos in one pack. If you want new insulation fitted, we can quote that at the same time.
We visit, measure the foam depth with a thermal imaging camera and check for overspray on cables and pipework. You get a fixed price the same day, usually within two hours of the survey. No charge for the visit, no obligation to book.
We lay dust sheets, seal the loft hatch with a zip barrier and set up a negative air machine so dust cannot drift into bedrooms. A PPE respirator and disposable coveralls go on before any tool is switched on. Setup takes about 45 minutes.
Dry ice blasting or sand blasting equipment breaks the foam bond, then a spray foam removal saw and oscillating multi-tool handle the thicker closed cell sections. An industrial vacuum captures debris at the nozzle. Most lofts are cleared in one to two days; larger roofs take three.
Once the foam is off, we inspect rafters for rot, condensation staining and insect damage. We photograph anything that needs attention and flag it to you before we leave. If a rafter needs a sister board, we quote it separately rather than hiding it in the bill.
Foam, dry ice pellets and blasting media are bagged and sorted for recycling. We sweep the loft, remove all barriers and walk you through the finished space. You get a removal report, waste transfer notes and after photos for your lender or building control.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Fires dry ice pellets at -78C to make foam brittle so it lifts off timber cleanly. No chemical residue, minimal dust, and safe around wiring when handled correctly.
Captures foam debris at the nozzle and filters airborne particles. Paired with a negative air machine, it keeps isocyanate dust out of your living space.
Cuts through thick closed cell foam and frees foam bonded to cables and pipework. The multi-tool lets us work close to services without nicking them.
Maps foam depth and finds hidden overspray and moisture pockets before we cut. It also shows which rafters have been affected by condensation.
Used on heavily bonded foam on masonry and hard-to-reach roof sections. Spent blasting media is captured and recycled where possible.
Protects technicians from isocyanate dust and foam particles. We wear full PPE on every job, and we change filters daily on larger removals.
A three-bed semi in Stanwix had closed cell foam sprayed across the entire roof deck. The buyer's lender refused the mortgage, and the sale was two weeks from collapsing. Condensation had already stained two rafters.
We removed the foam in two days using dry ice blasting, inspected the timbers, and issued a removal report with photos and waste transfer notes. The lender signed off within a week, and the sale completed on the original date.
A Victorian terrace in Denton Holme had open cell foam packed between the rafters. The owner wanted a loft conversion, but building control would not sign off while the foam was in place. Access was tight and the roof void was shallow.
We cleared the foam in a single day with compact blasting equipment and an industrial vacuum, then inspected the rafters. Building control signed off the next stage, and the conversion started the following week.
A rental in Botcherby had closed cell foam and condensation dripping from the rafters between tenancies. The landlord needed the loft cleared before new tenants moved in, with no time for a long job.
We removed the foam in two days, recycled up to 95% of the waste, and left the loft ready for conventional insulation. New tenants moved in the following week, and the landlord had the paperwork for their records.
Spray foam goes wrong in predictable ways, and Carlisle's damp climate makes most of them worse. Here are the problems we see most often, what happens if you leave them, and how we fix them.
Ask a pro →We extract the foam, inspect the timbers, and provide a removal report with photos and waste transfer notes. Most Carlisle cases are resolved within two to three working days, and we can prioritise jobs with a deadline.
We remove the foam, restore ventilation, and treat or flag any rot we find. A thermal imaging camera shows us where moisture has pooled, so we know which rafters to check first. Most lofts are cleared in one to two days.
We map overspray with a thermal imaging camera, then use an oscillating multi-tool and dry ice blasting to free cables without nicking insulation. Difficult removal from cables is a job we handle regularly.
We cut foam back in controlled sections rather than pulling it, which avoids stressing the timber. Any rafter that needs a sister board is photographed and quoted separately, so you see the evidence before you pay.
Most loft removals in Carlisle run £1,200 to £3,500 in 2026, depending on foam type, depth and access. A single open cell loft of 40 square metres typically sits at the lower end; a full roof with closed cell foam and limited access sits at the top. Cavity wall extraction is priced separately. We give you a fixed price after a free survey, so you know the total before we start.
Eco friendly removal means low-impact extraction methods and high recycling rates. We use dry ice blasting rather than chemical solvents, capture dust with air scrubbers and negative air machines, and recycle up to 95% of the foam, dry ice pellets and blasting media. That keeps polyurethane foam and isocyanate residue out of Cumbria landfill and out of your living space.
Yes. We sort extracted polyurethane foam, dry ice pellets and abrasive blasting media into separate waste streams, and up to 95% goes to recycling rather than landfill. You receive waste transfer notes for every load, which is useful if a lender or building control officer asks how the foam was disposed of. We can also provide before-and-after photos.
Yes, and it is one of our most common jobs. We extract the foam, inspect the roof timbers, and provide a removal report with photos and waste transfer notes that lenders and surveyors accept. Most Carlisle mortgage-related removals are completed within two to three working days, and we can prioritise your job if you have a deadline.
Spray Foam Removal near meOur core spray foam removal service covers lofts, roofs and cavity walls across Carlisle. It is the same team and the same equipment you get on an environmentally friendly insulation removal job, just scoped for standard foam removal without the extra recycling paperwork.Explore →
Same day Spray Foam RemovalWhen a mortgage deadline or a house sale forces the pace, we keep same day slots open. Call before 10am and we can usually survey and start extraction the same afternoon. Ideal for Carlisle sellers who need a clear roof void fast.Explore →24/7 Spray Foam RemovalFor commercial premises and landlords, we run a 24/7 call-out line. If a warehouse roof in Kingstown or a rental in Botcherby needs urgent foam removal outside normal hours, we can mobilise a crew and keep disruption to a minimum.Explore →
Residential Spray Foam RemovalMost of our Carlisle work is residential: lofts, attic rooms and roof voids in terraces, semis and detached homes. We seal the loft hatch, protect your carpets and clear the site each day, so you can keep living in the house while we work.Explore →
Commercial Spray Foam RemovalWe remove spray foam from warehouses, agricultural buildings and commercial roofs across Cumbria. Jobs are planned around your operating hours, with method statements and risk assessments provided in advance. Larger roofs are usually cleared in three to five days.Explore →
Loft Spray Foam RemovalLoft foam is the most common call we get. Closed cell foam traps moisture against the roof deck and causes condensation and rot. We extract it with dry ice blasting and saws, inspect the timbers, and leave the loft ready for conventional insulation.Explore →
Roof Spray Foam RemovalFoam sprayed directly onto the underside of roof tiles or felt is harder to reach. We use a spray foam removal saw, oscillating multi-tool and abrasive blasting media to clear it without damaging the roof covering. Access is planned during the survey.Explore →
Attic Spray Foam RemovalAttic conversions often have foam packed around rafters and cables. We map it with a thermal imaging camera first, then extract carefully around wiring and pipework. Difficult removal from cables is a common problem we solve without cutting services.Explore →One call gets you a free survey, a fixed price and a start date. We are CHAS and Constructionline accredited, we recycle up to 95% of extracted foam, and we provide the paperwork lenders ask for. Call 0122 891 5049 today.
Get a Free Survey 0122 891 5049 →Call 0122 891 5049 or email [email protected] and we will get back to you the same working day. We cover all CA postcodes and can usually survey your loft within 48 hours. For emergency spray foam removal Carlisle 24/7, call any time.